This genuine Bently Nevada standard extension cable is designed for the 3300 XL 8mm proximity transducer system. Featuring a length of 4.5 meters (14.8 ft) and integrated connector protectors, it ensures reliable signal transmission for radial vibration and thrust position monitoring. Built for industrial rotating machinery, it is fully API 670 compliant and compatible with Bently Nevada 3500 rack modules.
Technical Specifications & FAQs
Q1: What are the exact specifications and dimensions of the Bently Nevada 330130-045-02-00 extension cable?
A1: The Bently Nevada 330130-045-02-00 is basically a 75-ohm coax used in the Bently Nevada 3300 XL 8mm system.
“045” → 4.5 meters, that part is fixed.
“02” → connector protectors included (this is the practical bit people care about).
“00” → no agency approval config.
Nothing complicated honestly, it’s just a standard extension lead in the vibration chain, built for steady signal carry rather than anything fancy.
Q2: Is the 330130-045-02-00 cable fully interchangeable within the 3300 XL 8mm system without recalibration?
A2: Yeah, in most setups it’s basically drop-in. The Bently Nevada 330130-045-02-00 is made to tight enough tolerances that you don’t usually touch calibration when swapping it.
People do it all the time on-site—pull one, plug another, done. As long as you’re staying within the normal 3300 XL 8mm chain (same probe / Proximitor type), it behaves the same. No drama.
Q3: For which industrial applications is the 330130-045-02-00 extension cable typically used?
A3: Mostly rotating machinery stuff. Steam turbines, compressors, gas turbines… the usual suspects.
It’s carrying signals for radial vibration, thrust position, shaft movement monitoring, that kind of thing.
So yeah, anything “critical machine protection” where downtime is expensive. This cable just sits in the middle of that measurement loop.
Q4: How does the 330130-045-02-00 interface with the Bently Nevada 3500 monitoring rack?
A4: Simple chain, not much to overthink. Probe goes out → cable (this one) → Bently Nevada 3300 XL Proximitor sensor → then into the Bently Nevada 3500 rack system.
Inside the rack you’ll usually see modules like Bently Nevada 3500/40M handling the signal logic. It’s all aligned with API 670 style protection, nothing exotic.
Q5: What is the mechanical benefit of the "-02-" option in the 330130-045-02-00 part number?
A5: The “-02-” is really just the connector protectors. Sounds small, but in the field it matters. Keeps oil mist, moisture, dust from getting into the coax connection points. Without it, over time you can get noise or signal drift—especially in turbine halls or compressor skids. So yeah, not a performance upgrade on paper, but in real plants it helps stability stay consistent.
